View Single Post
  #7  
Old 2nd November 2011, 09:11 AM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 1,744
Default Re: KEL84 clicks and pops from right channel?

Dave, been following your thread and I do agree with Greg's comments, may be a little harsh, but true, I have just fixed a PRE3 and PHONO3S for a member and his soldering was bad, but it was his first attempt, I am shure he took on board my advice and feel you should take Richard's advice. Go over all your valve pin connections with quite a hot iron and flux and flow the solder through both sides of the board, this is most likely to be the problem, have a look before and after with a magnifier, it may suprise you. BOB
Reply With Quote