[bikerhifinut]

Originally Posted by colin.hepburn

HI All
Well went and got a 50k single pot for balance control experiment for the WAD CF Pre
So knocked up a test prototype Board
Using 10/15k in Series got 24.5k
Pot set at mid point gives
L. Channel 23.2k R channel 22.7k ish
So now, circuit checks out ok fitting the pot to WAD CF I then notes that the CF Alps volume pot is a 50k not a 100k like I thought bugger

Give it a go anyway Colin. You'll at least get an idea if its going to solve your balance issue.

Andy.