World-Designs-Forum  

Go Back   World-Designs-Forum > FAQ > FAQ - Test and Measurement
Register FAQ Members List Calendar Gallery Today's Posts Search Today's Posts Mark Forums Read

FAQ - Test and Measurement Checking Audio Components

 
 
Thread Tools Display Modes
  #1  
Old 6th January 2006, 09:57 PM
FAQ Team FAQ Team is offline
FAQ *****istrator
 
Join Date: Jan 2006
Location: faq
Posts: 44
Default What is X and Y and Lissajous on an Oscilloscope?

X and Y are the 2 axis on the scope screen or "graticule".

X is the horizontal axis, which represents the time the waveform is shown over.
Y is the vertical axis on which the wave height or "amplitude" is shown.

Tip, Y is high, X is a cross (across)

They are also labeled on each channel of 2 channel scopes as Ch1X and CH2Y so 2 signals can be input and compared on the screen using the X-Y control.
One signal drives horizontally X the other vertically Y.

So at its simplest if both signals were the same level and in phase and both channels were set to same input sensitivity the result would be a straight line at 45 degrees from bottom left to top right of the screen. Different shapes and directions of lines occur with differences between the 2 signals. For example if they were still both the same level but 180 degrees out of phase there would still be a straight line at 45 degrees but from bottom right hand corner to top left hand corner. These are Lissajous figures.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:22 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright World Designs