World-Designs-Forum  

Go Back   World-Designs-Forum > DIY Projects > Useful Links
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

Useful Links Links to other useful sites

Reply
 
Thread Tools Display Modes
  #1  
Old 19th September 2020, 09:35 AM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 4,965
Default LED Indicator Resistor Calculator

LEDs are a current device and are often supplied by an over-voltage supply which is current-limited by a series resistor.

The most important value we use to set the brightness and not over-run the LED is the amount of current we want the LED to pass.

There are newer LED versions on the market such Super Bright and Ultra Bright but of the ones I've tried these just allow greater current, and hence brightness, and behave quite similarly to Standard Bright at lower currents.

For an indicator, a Standard Bright Diffused is more evenly lit at low levels. A Super Bright can be run low and tends to emit a point souce light at lowest levels which can look good depending on what you want. I avoid Clear LEDs for this job as they can dazzle and really only look good at higher light levels.

Of the popular colours Green and Blue appear brighter than Red at lower current levels.

The simplest thing I can say is you'll find a setting of 3mA - 5mA will be good for a panel indicator using a 3mm or 5mm Standard Diffused Green or Blue LED. For a Red indicator you may need double that current for a similar visual level.

The general Max for these LEDs is around 20mA so start there if you like and wind it down but the eye adjusts for low light levels so don't be surprised how low you end up setting it.

There's a formula for working out the current manually but this calculator is vastly quicker and lets you input options and adjustments instantly,


https://ledcalculator.net/#p=50&v=2&c=4&n=1&o=w


I've left the default setting at the one I've just installed which is a Standard Green 5mm power indicator run off the amp's 50V rail. Have fun
Reply With Quote
  #2  
Old 19th September 2020, 01:56 PM
colin.hepburn colin.hepburn is offline
Super Moderator
 
Join Date: Jan 2006
Location: Newtonhill Aberdeenshire
Posts: 2,531
Default Re: LED Indicator Resistor Calculator

Hi Richard /All
Yes that looks like a nice easy the use and clear to see schematic, as well as a visual Diagram, I also like the resistor calc makes it a lot easier for me to follow another good calc. i use is electronics 2000
Here’s the link for the Electronic 2000 Calcs also handy to have
https://www.electronics2000.co.uk/ca...calculator.php
colin
__________________
The Blues man

Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s
Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2


If you have trouble reading my posts its because I am a dyslexic member
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:29 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright World Designs