World-Designs-Forum  

Go Back   World-Designs-Forum > World Designs > WD Amplifiers
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

WD Amplifiers For discusson of World Designs Amplifiers

Reply
 
Thread Tools Display Modes
  #1  
Old 28th November 2019, 10:36 AM
Lyndon Johnson Lyndon Johnson is offline
Member
 
Join Date: Dec 2016
Location: Bolton, Lancs, UK
Posts: 50
Default Phono II advice Please!

Back in 2000/01 my last World Audio build was the Series II Phono amp with power supply. Although I was very happy with my existing Hart/Linsley Hood 'shunt feedback pickup pre-amp' I wanted something to tinker with and upgrade in the same fashion as I had the KLP1 and K5881 Mk1 that it was to feed.
The build went well, all test voltages checked out (within 15%) and when connected up it was lovely and quiet, no hum or hiss.
However, I was disappointed with the sound - it seemed a bit 'ragged' and generally uninspiring. Thinking that it just needed running in I ran it for a couple months but found no improvement and noticed I was playing records much less. So I reinstated my Hart, satisfaction returned and I decided maybe my expectations had been too high and the Hart was better than I imagined. Eventually my Phono II went up to the loft.
It's back down from the loft now, test voltages rechecked (still within 15%), still quiet and still sounds muddled and uninvolving. It is now playing into a 300B P-P and KLS 3 'millenniums'.
Sting's 'Nothing Like the Sun' is one of my favourite LPs for demonstrating what vinyl can do and 'Englishman in New York' demonstrated to me that the KLPP II cannot be working as the designer intended. When the drums come in everything descends into a boring mush with very little dynamic range.
Any ideas where I should be looking to pinpoint what is wrong?
Many thanks,
Lyndon.
Reply With Quote
  #2  
Old 28th November 2019, 02:41 PM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,020
Default Re: Phono II advice Please!

Sorry Lyndon, I can not understand whether it is the Phono II or the KLP1 that you are unhappy with, I use Phono III and have used Phono II, that replaced a Linn Linto phono stage and I am very happy with it, is the KLP1 the simple two valve cathode follower ? if it is you could do much better than that. Bob
Reply With Quote
  #3  
Old 28th November 2019, 06:58 PM
Lyndon Johnson Lyndon Johnson is offline
Member
 
Join Date: Dec 2016
Location: Bolton, Lancs, UK
Posts: 50
Default Re: Phono II advice Please!

Hi Bob,
Thanks for responding. It's the Phono II that I am unhappy with.

(I turned the KLP 1 into a passive device many years ago - it is just a Panasonic Pot now and I am very happy with it).

I think something is wrong with the Phono II - maybe with the power supply but I was wanting to consult some wiser heads before starting to fiddle.

Lyndon.
Reply With Quote
Reply

Tags
klpp ii

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:17 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright World Designs