World-Designs-Forum  

Go Back   World-Designs-Forum > World Designs > WD Loudspeakers
Register FAQ Members List Calendar Gallery Today's Posts Search Today's Posts Mark Forums Read

WD Loudspeakers For discussion of World Designs Loudspeakers

Reply
 
Thread Tools Display Modes
  #11  
Old 28th February 2016, 05:05 PM
Edwin Edwin is offline
Senior Member
 
Join Date: Apr 2009
Location: Abingdon, Oxon
Posts: 121
Default Re: Making speaker cabinets

If you contact me via a PM we can decide the best way of getting the plans to you.
Reply With Quote
  #12  
Old 1st March 2016, 01:38 PM
Cycleallday Cycleallday is offline
Member
 
Join Date: Jul 2006
Location: Andover, Hants
Posts: 77
Default Re: Making speaker cabinets

Simon,
I started with the W25A standpoints and then 'upgraded' them to the floor models. Both were used in a small room and work really well when very near the back wall (in my opinion). I listened to them at Peters place before buying and have never had any desire to move away from them.

Anyway, I believe I still have a complete pair of crossovers for the standmount versions (not the ex tweeter version) and a disc with the plans for building both versions.

Contact me if you are interested in the crossovers or would like a copy of the disc.

Mel
Reply With Quote
  #13  
Old 2nd March 2016, 11:02 AM
simcox1 simcox1 is offline
Junior Member
 
Join Date: Oct 2012
Location: Haringey, London
Posts: 10
Default Re: Making speaker cabinets

I have PM'd both Edwin and Cycleallday
Reply With Quote
  #14  
Old 7th March 2016, 07:42 PM
VantheMan VantheMan is offline
Senior Member
 
Join Date: Jul 2007
Location: Canaries
Posts: 207
Default Re: Making speaker cabinets

I have the WD25TExs and I built them myself, getting them finished off (rounded edges on front baffle and 2 go-faster grooves down the fronts) and lacquered by a pro in the same colour as the walls in a bid to make them disappear physically just as they do sonically. I found it was quite easy to build the mdf square "tubes" (sides, front and rear) first and then sort of "line" them inside with the various pieces of chipboard and braces and loads of glue, then in turn lining the chipboard with the black goo and the fibre filling. The sandwich build made the driver cut outs a piece of cake using a simple adjustable halogen down-light ceiling cutter to mark a larger diameter on the mdf than on the chipboard and then carefully using a jig saw just shy of the mark and a wood file. My crossovers are external using Neutrik speakons to connect at both ends.
IMHO the use of external Xovers is to be recommended as it has allowed me to experiment in affordable upgrades with a) Mills resistors b) teflon caps and now c) Jantzen wax coils. In both a) and b) things have improved quite a lot - I donīt think the original components (wirewound enamels and Soniqs caps were anything special). The jury is still out on the inductors.
I canīt say I ever noticed any glaze to the sound using the Millennium tweeters from the beginning (Iīve never heard the original tweeters) but the use of Mills 12w resistors certainly took care of that lending a much smoother and more sophisticated sound to proceedings and the depth and sheer amount of bass improved no end after changing the paralleled 6.3 and 3.8uF caps Soniqs in the original kit for a Russian paper in oil/teflon pairing of the same total value. No idea why especially as they are in series in the tweeter section of the crossover but Iīm not going back to the originals, thatīs for sure.

http://s524.photobucket.com/user/Van...tml?sort=3&o=0

Last edited by VantheMan; 8th March 2016 at 02:27 PM.
Reply With Quote
  #15  
Old 15th March 2016, 08:26 PM
VantheMan VantheMan is offline
Senior Member
 
Join Date: Jul 2007
Location: Canaries
Posts: 207
Default Re: Making speaker cabinets

I donīt know if you have started your WD25As yet but just in case not, I would have a think about implementing the aperiodic port on the side panels somehow rather than on the front. That reticulated foam tends to sag and look a bit of a mess for a full frontal. I canīt help thinking the rectangular cut out should have been done inside out so the actual front baffle would have defined its lines and some sort of retainer on the inside.
Of course I reached these conclusions after building them which explains why I decided to go for the floorstanders in the end.
By the way, if you havenīt got the foam for the aperiodic port it needs to be a specific density. There was a guy in Sweden on this forum - Saschagabor - who used to sell it as he was forced to buy an inordinate amount from a wholesaler and tried to cut his losses.

Last edited by VantheMan; 15th March 2016 at 08:54 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:47 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright World Designs