Thread: Kit 6550
View Single Post
  #5  
Old 18th September 2014, 10:45 PM
Paul Stoneman Paul Stoneman is offline
Junior Member
 
Join Date: Apr 2014
Location: Tiverton
Posts: 16
Default Re: Kit 6550

Good evening John,
Thank you for your reply.
The inputs are the newer plastic type. I have ordered the bits to rebuild the power supply for the ECF80 heaters, the rest of the power supply was done a few months ago, one of the 4700uf caps that was used was a bit squashed, probably done in the post so hopefully that is the problem. if I find what the problem is, sorry when, never give up, never surrender unless it is your best interests, I will put the info on the forum, it may help someone else.
Kind regards Paul.
Reply With Quote