Re: New build WDPhono 3 Questions; heater voltage/LED
Its a WDPhono3 XL. The instructions state explicitly that C3,4,5 & 6 are not fitted, nor or are they supplied. They do not appear in the circuit diagram or the parts list.
I was aware that the LED was contacting the chassis and have removed it, I will insulate both legs. I intend to go through the whole heater circuit again later in the week but as I say I am measuring 6.5v with no valves in between 4/5 and 9 on all three bases whereas when the valves are in I am only seeing a 4.9v differential. Doubtless I have missed something or made a soldering error but I am curious about these 'missing' capacitors.
Graham
|