View Single Post
Old 21st September 2020, 07:55 AM
Richard Richard is offline
Super Moderator
Join Date: Dec 2005
Location: Notts
Posts: 5,077
Default Re: Setting up Squeezebox Touch

So a dodgy SMPS can upset the SB?
I wonder...…….
I went back up after 2 hours with it left switched on, and its stayed logged into the network and although it needed a reboot to unfreeze the display its started to work properly again.
I'll have an investigate, I could get a 9V 50VA transformer and I already have a couple or 3 LDO 5amp regs and a beefy bridge rectifier to cobble up a regulated 5V supply."

Yes Andy it upset mine anyway. The only other issue I had was with our SB Boom which had a dirty connector as Snowman Al described in that thread I linked to. The display faded over a few weeks then it got connection error messages. A spray with Servisol and re-plugging a few times sorted that out maybe a year or so back and fine since.
Reply With Quote