View Single Post
  #1  
Old 18th July 2021, 06:03 PM
colin.hepburn colin.hepburn is offline
Super Moderator
 
Join Date: Jan 2006
Location: Newtonhill Aberdeenshire
Posts: 2,661
Default WAD phono 3S Parts Selection Help

Hi All
Just been checking in my parts box for the leftover parts from my WD Phono 2 build. As at the time I build it I ordered spares of the standard and odd value Resistor needed for the build such as the 316k/39.2k all of the resistors were of the Holco and takman 0.5watt types. Which fitted the old phono 2 board.

So I have just discovered the spare 0.5-watt resistors I have donít fit the Phono 3S Board same applies to the large 8.2nf silver mica? Caps what a bummer
So will have to reorder from Hifi Collective or somewhere
My question is which type of resistors are you all using now in your builds. and the preferred replacements for the 8.2nf silver mica caps and parts numbers for them if pos thanks.
Colin
__________________
The Blues man

Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s
Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2


If you have trouble reading my posts its because I am a dyslexic member
Reply With Quote