View Single Post
  #6  
Old 19th July 2021, 01:54 PM
colin.hepburn colin.hepburn is offline
Super Moderator
 
Join Date: Jan 2006
Location: Newtonhill Aberdeenshire
Posts: 2,661
Default Re: WAD phono 3S Parts Selection Help

Quote:
Originally Posted by bob orbell View Post
Colin, if you are going to drill out the PCB holes, you MUST solder both sides as drilling will remove the electrical link between top and bottom tracks, but I hope you know this. Yes
Yes, I did bob drilling is just an idea. for now, I could just replace the 39.2k with the standard 39k it is just the 316k and 39.2k I have the problem with as odd values 0.25w are difficult to get now as the holco range are no more,
Colin
__________________
The Blues man

Turntable Rega 3 custom RB250 with ortofon 2M Blue /other goldring 1042 /WD phono2 /WD CF pre custom converted /WD psu2 /home built JE Labs Single Ended 6SL7/KT66/Speakers Frugal horns Mk1s
Other turntables AR EB101/Thorns TD150mk2/Thorns TD160mk2


If you have trouble reading my posts its because I am a dyslexic member
Reply With Quote