World-Designs-Forum  

Go Back   World-Designs-Forum > World Designs > WD Other Parts and Projects
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

WD Other Parts and Projects All other WD Parts and Projects

Reply
 
Thread Tools Display Modes
  #11  
Old 6th July 2020, 09:23 PM
bob orbell bob orbell is offline
Senior Member
 
Join Date: Nov 2009
Location: kettering northants.
Posts: 2,332
Default Re: Cathode Follower

Quote:
Originally Posted by John Caswell View Post
To be perfectly honest I would doubt if you will hear/notice any difference. Before you commit hari kiri on a new set of expensive cables see if you can borrow some.
1 Metre is not too long a length to worry about.

John
But before you try and borrow some, try this, simply remove the interconnect you are thinking of changing, clean the terminal ends, replace and listen, you may be surprised, fancy cables are a rip off. Bob
Reply With Quote
  #12  
Old 6th July 2020, 11:14 PM
Greg.'s Avatar
Greg. Greg. is offline
WD Archivist
 
Join Date: Dec 2005
Location: Bristol, UK
Posts: 3,482
Default Re: Cathode Follower

Lots of things to think about here from Richard’s take on various pre performances to how long should your interconnect cable be.

On cables, I strongly suggest you make your own interconnects by buying the cable and connectors and solder it up yourself. Much cheaper and you will get best connectivity/performance at a fraction of the price of a commercial product. All my Interconnect cables are home constructed for the best part of the last 30 years. Making your own means you can be specific about length and I have always applied a rule that as short as possible is best, at least with analogue cables. Digital is a bit different. Shout out if you want guidance on good cable to make your own interconnects.

I was not involved in Richard’s pre amp performance comparison so can’t comment on that. All I can say is that I originally had a Pre2 which, because of close proximity to the power amp hummed. I converted Pre2 to passive. Hum went away but the sound was a bit flat. I introduced the cathode follower mod and the sparkle to sound came back.

Moving on, like Bob, I fitted a CF circuit as per the FAQ which, realise is nothing to do with WAD. Certainly the circuit was used in earlier Hi-Fi World (WAD) DIY products, but the circuit has been around for years, and for best interpretation, read ‘Valve Amplifiers’ by Morgan Jones. I found that the CF circuit brought life and detail back to the sound. I was not aware of any frequency limitation or poor channel separation. I was well chuffed with the result and hung onto it. Like Bob, that sent me to discover the ‘Glassware Audio Design’ website and in particular their CF Aikido circuit. I incorporated that and it was a sound revolution. So quiet in the background and so alive in presentation of all frequencies. It really was a revelation in sound.

I have moved on and no longer use this kit, but for nostalgic reasons, I have retained my WAD 2A3 PSE and have bought back my pre amp units which includes the Glassware CF. A great combination of kit to listen to for a bit of fun every now and then.
Reply With Quote
  #13  
Old 7th July 2020, 10:34 AM
emollusc's Avatar
emollusc emollusc is offline
Member
 
Join Date: Jun 2020
Location: Altrincham
Posts: 35
Default Re: Cathode Follower

Thanks guys for the replyies they are most useful.

Don't worry John I have no intention of cutting up my existing interconnects as you never know when you might need the extra length.

Greg, great minds think alike, I was intending to make up my own cables, using some silver plated phono plugs I have found from China that look like they are worth a punt, but I've yet to decide on the cable.

My original thought was to pumb in the WD CF circuit, but I will do a bit of research first to see what my options are.


Brian
Reply With Quote
  #14  
Old 7th July 2020, 11:43 AM
John Caswell John Caswell is offline
Super Moderator
 
Join Date: Dec 2005
Location: Wokingham, Berkshire
Posts: 1,677
Default Re: Cathode Follower

Brian,
You are now entering a world of snake oil and the like. Some home made cables are rubbish and some are very good, to whit Greg used a TNT cable consisting of stands of cat 5 network cable, which he swore was the cats whiskers but someone else tried this same cable on a Naim amp and it was goodbye output transistors. As I keep telling customers "nirvana doesn't exist"
There are lots of good basic cables out there without paying a fortune and you certainly don't need to get dragged into the "Well it cost 6000 so it must be better" disease. My usual answer to that comment is "define better" Often met with a blank stare
You will need to "cut the coat etc" There are lots of cables I would like to try but as my cable run is 11 Metres and I biwire that is goodbye to 44 Metres! Even the so called affordable L/S cables at 200/metre would equal 8800. I think not!

John

Last edited by John Caswell; 7th July 2020 at 11:52 AM. Reason: Addnl info
Reply With Quote
  #15  
Old 7th July 2020, 12:33 PM
pre65's Avatar
pre65 pre65 is offline
Senior Member
 
Join Date: Jan 2006
Location: Ashen- Essex/Suffolk bord
Posts: 4,549
Default Re: Cathode Follower

I needed to make up some long interconnects from preamp to monoblocks sited by the speakers, about 4Mtrs.

I searched online for info on good, but inexpensive, and ended up ordering some Sommer 300-0024 Tricone MkII Unbalanced Cable (Green). It should be delivered today/tomorrow, so I won't know what it sounds like for a while, but at 0.98 Mtr it's worth a go, and it looks good ! Other colours are available.


https://www.studiospares.com/Cables-...een_546830.htm

What type of plugs to fit is another conundrum.


*
__________________
Philip.

Everything in this post is my honest opinion based on what i thought I knew at that very moment in time.
Reply With Quote
  #16  
Old 7th July 2020, 01:56 PM
Richard Richard is offline
Super Moderator
 
Join Date: Dec 2005
Location: Notts
Posts: 5,134
Default Re: Cathode Follower

Quote:
Originally Posted by emollusc View Post
Thanks Richard,

what a fantastic opportunity to test all three types of amplifiers. Sounds, like I would need to 'suck it and see' or 'hear' in this case to see if I liked the change.

What do you class as short interconnects? I have 1m pre to power connections but I'm considering replacing them with low capacitance 0.5m ones. This is mainly due to DACT recommending a 10K attenuator and low capacitance interconnects as this increases high-end bandwidth and I have no intention or replacing my 50K attenuator due to cost. DACT have provided a attenuation curve calculator which may be of interested.


Brian

Hi Brian,

I used 0.5M of low cap cable (100pf/M). I agree with John that 1M should be no problem but be aware some real cheapies can be several hundred pF/M.

The comparison day was very enjoyable, quite a while ago now 2006, and included a lot of what we are still discussing in your recent threads. Nice to re-visit those days.

I've dug out 2 threads, the first about the 300B stereo amps and clone versions made by Greg and friends, and the second about the meet up we had to listen to them, pre-amps, SB, dacs etc. Wordy but you might find parts of interest

Old 300bpp Ringing

300B PP NottFest Meetup
Reply With Quote
  #17  
Old 7th July 2020, 03:25 PM
bikerhifinut bikerhifinut is offline
Senior Member
 
Join Date: Jan 2006
Location: Penrith, Cumbria
Posts: 1,060
Default Re: Cathode Follower

My sixpence worth...…….

Using a CF or transformer output preamplifier circuit, (Or for that matter a simple op amp buffer or emitter follower in silicon) will give you a nice low output resistance which more or less means cable capacitance hasn't got the effect, if any, that it would if connecting things up off the wiper of a pot or switch in a passive volume control ( you can't really call it a preamplifier to my mind).
So That's one concern out of the way.
I'm 100% with Bob on the relative merits of expensive connecting wires. And Bob and I don't see eye to eye on everything but here we do.
For a while in the old listening room I was using a 10m length of cable from preamp to power amps due to the layout I was using. I first had some fairly basic single core screened cable (it claimed to be OFC copper but who knows). That seemed perfectly satisfactory to me and I couldn't detect much if any difference to my usual 1.5m of the silver plated soniqs branded stuff from Matthew. Incidentally if making your own wires up that's a good value product and looks quite sexy...…….
Then I tried some bandridge "professional" microphone cable. It was cheap from maplins at the time in one of their regular stock clearances, wish I'd bought the drum of it when they closed down for a tenner! Again it was excellent, I wired it up "semi balanced" i.e the screen only earthed at one end and the inner wires completing the circuit. I had a Hum loop issue at the time, I never really got to the bottom of it and since then I have moved to a new listening space and also rebuilt the power amp, reverting to a stereo rather than the 2 monoblocs. And also the WD KT88 amp now is set up as an integrated with the relay board and a home fitted Hi Fi Collective remote volume control.
Anyway I found the "Cooking" pro grade mic cable to be every bit as good as any fancy stuff I have odd examples of.
As Greg says...…… your mileage may vary.

I also have the Aikido CF board in a pre3 case. It's about as good as any CF gets, again I think you'll find very little to choose between that, the current WD CF kit which will be excellent value as a kit of parts, and a standard "Bootstrapped" CF circuit.
Confession time now...….. my preferred preamp these days is a solid state Rega Cursa3 which I really like, its very neutral and has the advantage for me of having an easily adjusted gain setting in 3 steps from unity to enough to drive a pair of quad11s that need 1.4 Volts on them.

here's a good explanation and practical example of a Bootstrapped CF
http://www.valvewizard.co.uk/accf.html

Andy

Last edited by bikerhifinut; 7th July 2020 at 03:35 PM. Reason: missed summat out
Reply With Quote
  #18  
Old 7th July 2020, 04:26 PM
Greg.'s Avatar
Greg. Greg. is offline
WD Archivist
 
Join Date: Dec 2005
Location: Bristol, UK
Posts: 3,482
Default Re: Cathode Follower

Quote:
Originally Posted by John Caswell View Post
Some home made cables are rubbish and some are very good, to whit Greg used a TNT cable consisting of stands of cat 5 network cable, which he swore was the cats whiskers but someone else tried this same cable on a Naim amp and it was goodbye output transistors.

John
Hang on John, this discussion is about interconnects. I have never used cat 5 cable for interconnects and for years have always used the WD Soniqs cable or the slightly heavier duty version sold by IPL Acoustics as IC2.

I followed the TNT recipe for ‘Twisted Twins’ speaker cable and for sure, like many others, found it to perform excellently. It is also well documented that this is a high capacitance design which is fine for use with valve amplifiers with O/P transformers. The likes of Naim and NVA have always warned their customers that high capacitance speaker cables are not suitable and will damage their amplifiers. The example you gave does not indicate a bad DIY cable, but rather user error. I no longer use cat 5 and have settled for single runs of Bluejeans (Belden 5T00UP) cable as I found no benefit to bi-wiring. It just doubles the capacitance and doubles the cost, IMHO.
Reply With Quote
  #19  
Old 7th July 2020, 06:35 PM
John Caswell John Caswell is offline
Super Moderator
 
Join Date: Dec 2005
Location: Wokingham, Berkshire
Posts: 1,677
Default Re: Cathode Follower

I don't believe I said or even implied that you used cat 5 as "interconnects". If L/S cables aren't interconnects then I don't know what they are.

John
Reply With Quote
  #20  
Old 7th July 2020, 07:03 PM
pre65's Avatar
pre65 pre65 is offline
Senior Member
 
Join Date: Jan 2006
Location: Ashen- Essex/Suffolk bord
Posts: 4,549
Default Re: Cathode Follower

Must admit I've always understood "interconnect" to refer to a cable connecting two pieces of equipment other than loudspeakers. But that's just me.
__________________
Philip.

Everything in this post is my honest opinion based on what i thought I knew at that very moment in time.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:15 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright World Designs