World-Designs-Forum  

Go Back   World-Designs-Forum > World Designs > Problems
Register FAQ Members List Calendar Gallery Today's Posts Mark Forums Read

Problems For questions and answers re World Designs Projects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10th February 2019, 08:30 PM
G Willis G Willis is offline
Member
 
Join Date: Mar 2017
Location: UK
Posts: 31
Default New build WDPhono 3 Questions; heater voltage/LED

Hi,

I have just completed a new build of the PSU3 and WDPhono3. This is my first build so I am new to this.

In testing the voltages are all measuring within the stated 15% except the heater voltages which seem off.

I measure a healthy 6.5v across the heater pins (1&4) on the power cable from the PSU. However when plugged into to the phono stage the voltage across HTR+ and HTR- is a fairly anaemic 4,9v. More, the HTR+ to ground reads 54v rather than the specified 49v, and for HTR-/Gnd measures 49v rather than 43v.

Does this indicate a problem?

Also the L.E.D does not light. The instructions say to wire between LED1 and LED2 but LED1 does not seem to go anywhere. I would like to get some confirmation of where the L.E.D should go as its not shown on the circuit diagram. As the LED uses the heater circuit maybe my problems are connected.

Any help gratefully appreciated.

Graham
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 03:13 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright World Designs